Top White
High quality gypsum produce from Sinai rocks which Purity more than 93 %.
The degree of whiteness more than 92% used for cornices and decorative forms moulding .
Key facts
- Long setting time for big size cornices and forms moulding .
- High compressive strength.
- High degree of whiteness.
- Moulding purpose
- Gypsum forms
Mixing:
Top White is sprayed on water with the right ratios (Don’t add water to powder).
Then leave for 2 minutes till it soaks completely.
Stir the mix perfectly in all directions till reaching a homogeneous mortar, then fill the mould with
the product and leave it until final setting .
Specifications of Top White
|
Result |
Test |
|
72 % |
Water Gypsum Ratio % |
|
0 |
Surface Water ( SW ) % |
|
5.0 – 5.5 % |
Crystal Water( CW ) % |
|
7 – 9 min |
Initial Setting ( min ) |
|
27 – 30 min |
Final Setting ( min ) |
|
1 – 1.5 % |
Fineness ( 150 µ ) |
|
0 % |
Fineness ( 200 µ ) |
|
2.5 – 4 N/mm² |
Bending Strength ( N/ mm² ) |
|
60 – 90 kg/ cm² |
Compressive Strength ( kg/ cm²) |
|
10 kg/ cm²< |
Hardness ( kg/ cm²) |
|
92 % < |
Whiteness |
|
93 %< |
Purity |
|
40 Kg ± 1 % |
Bag Weight |
|
Polypropylene valve bag |
Bag Type |
Packing:
Top White is supplied in 40 KG Polypropylene valve sack.
Polypropylene suitable for the bag design which is specified according to the company identity.
The construction of the sacks ensures that the contents will be protected under normal conditions of transport,
Storage and handling:
Each sack should be marked with the date of production.
One ton: 25 bags
Storage Conditions:
Must be stored in a dry area away from the reach of humidity or any water source.
Stored on wooden pallets and covered with impermeable cover to maintain a steady quality the longest
Duration possible.
Shelf life: for 6 month, avoiding direct contact with water in proper storage conditions.
Standard:
According to Egyptian Standard 188 Part 1 – 2013.
Top White
High quality gypsum produce from Sinai rocks which Purity more than 93 %.
The degree of whiteness more than 92% used for cornices and decorative forms moulding .
Key facts
- Long setting time for big size cornices and forms moulding .
- High compressive strength.
- High degree of whiteness.
- Moulding purpose
- Gypsum forms
Mixing:
Top White is sprayed on water with the right ratios (Don’t add water to powder).
Then leave for 2 minutes till it soaks completely.
Stir the mix perfectly in all directions till reaching a homogeneous mortar, then fill the mould with
the product and leave it until final setting .
Specifications of Top White
|
Result |
Test |
|
72 % |
Water Gypsum Ratio % |
|
0 |
Surface Water ( SW ) % |
|
5.0 – 5.5 % |
Crystal Water( CW ) % |
|
7 – 9 min |
Initial Setting ( min ) |
|
27 – 30 min |
Final Setting ( min ) |
|
1 – 1.5 % |
Fineness ( 150 µ ) |
|
0 % |
Fineness ( 200 µ ) |
|
2.5 – 4 N/mm² |
Bending Strength ( N/ mm² ) |
|
60 – 90 kg/ cm² |
Compressive Strength ( kg/ cm²) |
|
10 kg/ cm²< |
Hardness ( kg/ cm²) |
|
92 % < |
Whiteness |
|
93 %< |
Purity |
|
40 Kg ± 1 % |
Bag Weight |
|
Polypropylene valve bag |
Bag Type |
Packing:
Top White is supplied in 40 KG Polypropylene valve sack.
Polypropylene suitable for the bag design which is specified according to the company identity.
The construction of the sacks ensures that the contents will be protected under normal conditions of transport,
Storage and handling:
Each sack should be marked with the date of production.
One ton: 25 bags
Storage Conditions:
Must be stored in a dry area away from the reach of humidity or any water source.
Stored on wooden pallets and covered with impermeable cover to maintain a steady quality the longest
Duration possible.
Shelf life: for 6 month, avoiding direct contact with water in proper storage conditions.
Standard:
According to Egyptian Standard 188 Part 1 – 2013.
Export
Saber Nasser
Export Director
Mobil: (+2) 01027000348
Fax: (+2) 0223146312
This email address is being protected from spambots. You need JavaScript enabled to view it.
Address
Company name:
Sinai Stars for Gypsum Co.
Head office address :
New Cairo, 5th district, Down Town, S3, 2nd floor , Cairo , Egypt.
Factory Address:
Ismailia, Quantara East, Industrial zone 2, Egypt.